PENT1040A universal 40 watt (ieee802.3af non-compliant) high power poe gigabit injector topology switching-fixed frequency flyback dielectric withstand primary-secondary 3000vac, 4250vdc secondary-ground 500vdc spacing 5mm primary-secondary leakage current less than 250 ua effciency 75.1% min. emc information emissions fcc part 15. class b en55022. class b harmonic en61000-3-2 vff en61000-3-3 esd en61000-4-2. level 2 rf efi en61000-4-3. level 2 eft en61000-4-4. level 2 surge en61000-4-5. level 3 cdi en61000-4-6. level 2 cd en61000-4-8. level 1 voltage dips en61000-4-11 ce lvd, emc, rohs, weee, ce compliant hold-up time @120vac 18ms min. typ. storage temp -30 c to +85 c approvals and safety culus : ul/csa60950 standards tuv : en60950 ce: lvd, emcd general specifcations specifcations ? 10/100/1000 (mbps) data rates ? self-contained injector ? 100-250vac universal input ? desktop style / non-vented case ? ieee802.3af non-compliant ? power on led ? over load shutdown and short circuit protection ? regulated output with low ripple ? complies with emi/rfi regulations ? ce compliant international safety standard approvals sl power electronics corp ? 6050 king drive ? ventura, ca 93003 ? phone:805.486.4565 ? fax:805.487.8911 ? email:info@slpower.com ? www.slpower.com combined line and load excluding cord 1% voltage regulation ripple 1% vp-p max. transient response 0.5ms for 50% load change typical protection foldback overcurrent protection, short circuit protection output specifcations ac input voltage range 100-250vac -10%, +6% line frequency 47-63hz ac input current 1a max. protection internal primary current fuse, inrush limiting input specifcations thermal performance operating temperature 0 c to 40 c no derating, convectional cooling non vented case relative humidity non-condensing 5% to 95% altitude 0-10,000 feet environmental specifcations
PENT1040A universal 40 watt (ieee802.3af non-compliant) high power poe gigabit injector output max ripple ault part number voltage min max watts vp-p max. PENT1040A5600f01 56 v 0.00 a 0.71 a 40 w 560 mv output currents sl power electronics corp ? 6050 king drive ? ventura, ca 93003 ? phone:805.486.4565 ? fax:805.487.8911 ? email:info@slpower.com ? www.slpower.com data sheet ? 2008 sl power electronics corp. the information and specifcations contained in this data sheet are believed to be correct at time of publication. however, sl power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. specifcations are subject to change without notice. rev.8/28/08 for the most current data and application support visit www.slpower.com input confguration shaver c8 (n) iec320 w /ground c14 (f) iec320 w /o ground c18 (q) australian (e) n. america/ japan (b) europe (m ) united kingdom (g) shaver c8 (n) iec320 w /ground c14 (f) iec320 w /o ground c18 (q) australian (e) n. america/ japan (b) europe (m ) united kingdom (g) pent 1 040 a 56 00 f 01 product number of output confguration output output input standard family outputs wattage type voltage connector confguration (no modifcations name or special packaging) ault part number key mtbf 100,000 calculated hours weight (excluding cord) 7 ounces, 200 grams case and dimension 5.24l x 2.13w x 1.42h (in) 133.0l x 54.0w x 36.0h (mm) case material black 94v0 polycarbonate cord and connectors dual rj45 jacks built into the enclosure general specifcations (continued from p. 1) poe gigabit pin-out connections: data pins 4/5 (data + pwr) data pins 1/2 (data only) data pins 3/6 (data only) data pins 7/8 (data + pwr) note: = transformer pin connections 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 j2 j1 (p ower and data out) (data in) (rear of unit) power ( + ) power (-) options (additional costs may apply): ? custom label artwork ? custom agency approvals available ? surge protection (input & output) ? mounting bracket ? custom poe modifcations personalized poe
|
